Installation Work; Install The Fuser Cleaner And Oil Bottle - Brother HL-2600CN Service Manual

3.

INSTALLATION WORK

Install the unit parts of the starter kit into the printer according to the following
procedures:
3.1

Install the Fuser Cleaner and Oil Bottle

1) Open the paper exit cover.
Pressure has been released by the
fusing release lever between the fuser
roller and back-up roller while the
transportation and storage.
Release the fusing release lever.
Do attempt to loosen the oil bottle's
cap, because loose cap is likely to
cause the oil leakage.
2) Open the retainer lock lever of oil bottle
and the fuser cleaner.
3) Install the oil bottle to the fusing unit.
4) Install the fuser cleaner to the fusing
unit.
5) Hold the fuser cleaner with the retainer
lock lever.
6) Close the paper exit cover.
CAUTION
III-5
Fusing
release lever
)LJ
Fusing oil bottle
Fig.3-4
Fuser cleaner
Fig.3-5
Paper exit cover
Lock lever