Brother HL-2600CN Service Manual page 283

17) Remove the fusing roller 2 as shown in the figure below.
18) Remove the release levers (R) and (L).
19) Remove the Crings on both ends of the fusing roller 2.
20) Remove the gear (FU) (BR) 2 and FU2 gear 63.
21) Remove the C rings at both sides.
22) Remove the ball bearing FU2 (2 pcs.) from the fusing roller 2.
Gear (FU) (BR) 2
Fusing roller 2
C ring
Release lever (R)
Ball bearing FU2
Ball bearing FU2
Release lever (L)
FU2 gear 63
C ring
Fig.7-102
VII-71