Right Side Of The Printer - Brother HL-2600CN Service Manual

4.2

Right Side of the Printer

4.2.1 Base Cover (R) 2
1) Remove the set screws BT4X8 (2 pcs.) from the base cover (R) 2.
2) Remove the base cover (R) 2 from the base.
Note:
If the optional lower tray unit is fitted, it will be necessary to remove the lower tray clamp
screw and locking bar to release the base cover (R) 2.
N
When assembling the base cover, insert the leading edge of the base cover (R) 2 into
the hook provided at the bottom (left and right) of the base plate.
N
Ensure that projecting part (
base plate bottom.
Base cover (R) 2
Fig.7-29
PRECAUTION 
) of the base cover (R) 2 goes into the hole in the
VII-20