Brother HL-2600CN Service Manual page 230

4.1.13 WT U Spring / DEV, Drive Gear 2
1) Remove the C ring and remove the four DEV, drive gears 2 from the (gear base).
2) Remove the set screw (1 pc.) to remove the (gear) and (gear holder) from the shaft.
3) Remove the end of the WT U spring from the shaft of the frame to remove the WT U
spring from the frame.
(Gear holder)
DEV, drive gear 2
C ring
(Gear)
WT U spring
VII-18
Fig.7-25
Fig.7-26
DEV, drive gear 2
DEV, drive gear 2
DEV, drive gear 2