Brother HL-2600CN Service Manual page 279

4.6.5 Paper Sensor (PT1)
1) Release the three hooks to remove the paper sensor from the frame.
2) Disconnect the connector connected to the paper sensor.
4.6.6 Paper Pick-up Roller / Separator Pad 2
1) Move the paper pick-up roller to the direction of the arrow in the figure below to
remove it.
2) Move the separator pad 2 to the direction of the arrow in the figure below to remove it.
N
Do not touch the surface of the paper pick-up roller and separator pad 2.
N
Never remove the torque screws indicated in the figure above.
Fig.7-95
Torque screw
Fig.7-96
PRECAUTION
VII-67
Hook
Hook
Paper sensor (PT1)
Separator pad 2
Paper pick-up roller