Sequence of Assembling
1) Close the transfer unit 2.
2) Plug the power code into the power outlet and turn on the printer.
3) Upon completion of the warming-up process.
4) Press any of the Menu buttons (+, -, Set or Back) to take the printer Off Line.
5) Press + or – until "RESET MENU" appears.
6) Press Set to proceed to the next menu level, and then press + or – until "PARTS
LIFE" appears.
7) Press Set, and then press + until "120K KIT" appears.
8) Press Set, and then press Go. The printer is now in the READY state.
VI-29