Brother HL-2600CN Service Manual page 141

Code No.
ALIGN TONER CG
16-3
16 ALIGN
16-4
ALIGN BELT CG
16 ALIGN BELT CG
16-5
ALIGN LFU
16 ALIGN LFU
16-6
ALIGN TRANSFER ROLLER
16 ALIGN TRANSFER
LCD Message
[*5]
TONER CG [*4]
[*4]
[*4]
ROLLER [*4]
V-16
Description of Message
x
The engine is idling.
x
The Power LED is lit.
[*5]: The color of the incorrectly installed
toner cartridge will be indicated as
follows;
Y: Yellow
M: Magenta
C: Cyan
K: Black
x
Reinstall the toner cartridge correctly.
x
This message will be automatically
cleared by open & close operation of
the front cover.
x
The engine is standstill.
x
The Power LED is lit.
x
The OPC belt cartridge is not
installed. Reconfirm the installation
status of the OPC belt cartridge.
x
This message will be automatically
cleared by open & close operation of
the paper exit cover or front cover.
x
Engine stands by as "ALIGN LFU"
status.
x
Turn the power off, and then connect
the harness between the engine and
LFU.
x
Turn the power on. If the warming-up
process starts, it means that proper
connection is made.
x
Engine stands by as "ALIGN
TRANSFER ROLLER" status.
x
The Power LED is lit.
x
Transfer roller is not installed.
Reconfirm the installation status of
transfer roller.
x
This message will be automatically
cleared by open & close operation of
back cover (L).