Brother HL-2600CN Service Manual page 187

1.2.6 Cleaning the Printer Interior
The printer interior (bottom) should be cleaned according to the periodic
maintenance cleaning cycle set out in Table 6-3.
CAUTION
Before cleaning the printer interior, protect the transfer drum with a piece of paper so
that the nozzle of the vacuum cleaner is not contacted directly with the surface of the
transfer drum 2.
<Tools to Prepare>
1) Toner vacuum cleaner
2) Cotton cloth
<Cleaning Procedure>
1) Turn off the remote switch and power supply, and unplug the power code.
2) Open the paper exit unit cover 2 and the paper exit front cover 2.
3) Remove the toner cartridges and the OPC belt cartridge.
4) Vacuum up toner scattered on the bottom of printer interior with a vacuum
cleaner designed to handle toner particles.
5) Clean the printer interior with a cotton cloth.
6) Replace the removed items.
Printer interior
Toner vacuum cleaner
Fig.6-13
VI-16