Rear Of The Printer - Brother HL-2600CN Service Manual

4.6

Rear of the Printer

4.6.1 Transfer unit 2
1) Open the transfer unit 2.
2) Remove the end of the TR3 rear band being attached to the frame as shown in the
figure below.
3) Remove the set screw ST3X6 (1 pc.) to remove the TR3 hinge support from the
printer.
4) Remove the transfer unit 2 from the printer.
Transfer unit 2
TR3 hinge support
Fig.7-89
VII-63
TR3 rear band
3
4
1
2