Download  Print this page

Brother HL-2600CN Series Quick Setup Manual

Color laser printer.
Hide thumbs
   

Advertisement

Color Laser Printer HL-2600CN series
Quick Setup Guide
Read the "Safety Sheet" first to ensure that you use this printer safely.
Read this "Quick Setup Guide" before you set up the printer.
Before you can use the printer, you must set up the hardware and install the driver.
Identify the operating system on your computer (Windows
Windows NT
®
4.0, Windows
®
2000 / XP or Macintosh
The interface cable is not a standard accessory. Please purchase the appropriate
interface cable for the interface you intend to use (Parallel, USB or Network).
Most existing parallel cables support bi-directional communication, but some might
have an incompatible pin assignment or may not be IEEE 1284 compliant.
If you are an Administrator: Configure your network printer settings referring to the
reverse side of this sheet.

Carton Components

Carton components may differ from one country to another.
Save all packing materials and the printer carton. They should be used when shipping the printer.
®
Windows
CD-ROM
Quick Setup Guide
Macintosh
(including User's
Driver Installation Guide
Driver Installation Guide
Guide)
Oil bottle
Fuser cleaner
OPC belt cartridge
Oil syringe
Toner cartridges (Black, Cyan, Magenta and Yellow)
What is Included on the CD-ROM
You can Find a Variety of Information on this CD-ROM.
Install Software
Install the printer driver and utilities.
(Mac OS X is not supported by Install
Software).
Maintenance Tutorial
Instructional movie for printer maintenance.
Manual
®
Windows
View the User's Guide and Network User's
Guide in PDF format. (Viewer included)
Color PDF Print Samples
View color samples of printouts from an
HL-2600CN in PDF format.
Learn More
Watch instructional movies to learn about
our unique software features.
Brother Solutions Center
The Brother Solutions Center
(http://solutions.brother.com) is your one-
stop resource for all your printer needs.
Download the latest drivers and utilities for
your printers, read the FAQs and
®
Macintosh
troubleshooting tips or learn about special
print solutions.
LJ3746001 Printed in Japan
Setting Up the Printer
Step 1 Install the Oil Bottle and the Fuser Cleaner
Protective Parts
Top Cover
®
95 / 98 / Me,
®
).
1
Remove the protective parts.
Open the top cover.
Step 2 Install the OPC Belt Cartridge
®
AC power cord
Front Cover
1
Open the front cover.
Printer
Step 3 Install the Toner Cartridges
Toner Cartridge
1
Rock the toner cartridge 3
to 4 times.
Step 4 Load Paper in the Paper Tray
Protective Part
1
Remove the protective part.
Step 5 Print a Test Page
1
Make sure the printer power button is off.
Do NOT connect the interface cable.
Fusing Unit
Pressure Release
Lever
2
Move the fusing unit pressure
3
Install the oil bottle in the fusing unit with the
release levers to the SET position.
label side facing you.
Note: Please be careful not to touch the green surface of the OPC belt or expose it to light for any length of time.
Belt Cartridge
OPC Belt
Lock Levers
Cartridge
2
Release both belt cartridge lock
Remove the orange belt tension release pins from
3
levers.
both sides of the OPC belt cartridge.
Remove the protective sheet.
'REMOVE' Tape
Protective Cover
2
Pull off the tape labeled 'REMOVE,' and
3
Install the toner cartridge by sliding it into the correct guide.
then remove the orange protective cover.
Match the cartridge color label to the corresponding label
on the printer.
Paper Guide
Paper Tray
2
Pull the paper tray completely out of the
printer.
Connect the AC power cord to the
Turn on the
2
3
printer, and then plug it into the AC
power button.
outlet.
Note: When you want to change the language of the control panel masssage, refer to "Setting Your Language on the Control Panel" on the reverse.
Continue to the
Windows
Oil Bottle
Fuser Cleaner
Fusing Unit
4
Insert the fuser cleaner into the fusing
unit with the roller side facing you.
Protective Sheet
Belt Tension
Release Pin
Printer Guides
4
Insert the OPC belt cartridge into the
printer guides with the flat side facing
you.
K
Y
M
C
4
Repeat Steps
1
through
remaining toner cartridges.
Paper Guide
Adjust the paper guides to fit the size of paper you want to load.
3
Load paper in the paper tray.
Unfold the Tray
Control Panel
Extention Flap
K
C
M
Y
NETWORK READY
NETWORK READY
HL-2600CN
Power
Ready
Ready
Data
Alarm
Job
Go
Cancel
Secure
Print
Reprint
Back
Set
After the printer warms, the READY message
Press the Go button. The printer will print a test page.
4
5
will appear.
Check that the test page is printed correctly.
®
Driver Installation Guide or
Macintosh
Oil Bottle Lock Lever
5
Lock both oil bottle lock levers.
Lock the belt cartridge lock levers.
5
Close the top cover.
Color Labels
K
Y
M
C
Close the front cover.
3
for the
5
4
Re-install the paper tray in the printer.
K
C
M
Y
NETWORK READY
NETWORK READY
HL-2600CN
Power
Ready
Ready
Data
Alarm
Job
Go
Go
Cancel
Cancel
Secure
Print
Reprint
Back
Set
®
Driver Installation Guide.

Advertisement

Table of Contents

   Related Manuals for Brother HL-2600CN Series

   Summary of Contents for Brother HL-2600CN Series

  • Page 1: Carton Components

    Read the "Safety Sheet" first to ensure that you use this printer safely. Read this "Quick Setup Guide" before you set up the printer. Before you can use the printer, you must set up the hardware and install the driver. Identify the operating system on your computer (Windows ®...
  • Page 2 An asterisk mark (*) appears on the LCD. For more information refer to the Network User's Guide on the supplied CD-ROM or go to http://solutions.brother.com ©2001 Brother Industries, Ltd. ©1998-2001 TROY XCD Inc. ©1983-1998 PACIFIC SOFTWORKS INC. ALL RIGHTS RESERVED Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S.

This manual is also suitable for:

2600cn - hl color laser printer

Comments to this Manuals

Symbols: 0
Latest comments: