Brother HL-2600CN Service Manual page 374

PAPER&TRAY SIZE
Specifies the default paper size.
DEF PAPER =LT
DEF PAPER =A4
PARALLEL MENU
Changes the signal timing of the Centronics interface
PARALLEL TIMING
CDCC PSW = L
CDCC PSW = H*
STB / ACK DELAY
CDCC BSSL = H
CDCC BSSL = L*
INPUT PRIME
INPUT PRIME = OFF* The INPUT PRIME signal does not reset the printer.
INPUT PRIME = ON
REPRINT ON/OFF
Specifies that the reprint function is enabled or disabled forcedly.
REPRINT = ON*
REPRINT = OFF
AUTO HRC OFF
Specifies that the smoothing control is enabled or disabled automatically depending
on the contents of the file.
AUTO HRC = OFF*
AUTO HRC = ON
The default paper size is letter for the US and Canada
models.
The default paper size is A4 for the other models.
The BUSY signal gets high when the STROBE signal
goes up.
The BUSY signal gets high when the STROBE signal
goes down.
The ACK signal is output when the BUSY signal goes
down.
The ACK signal is output before the BUSY signal goes
down.
The INPUT PRIME signal resets the printer.
The reprint function is enabled or disabled following the
setting of the user menu.
The reprint function is enabled forcedly.
A-27