Details Of Each Process - Brother HL-2600CN Service Manual

Color laser printer

Hide thumbs Also See for HL-2600CN:

Table of Contents

Details of Each Process

The charging process ensures that the OPC belt is evenly charged by the charger

Structure of the Charger Unit (Refer to Fig.4-8 and Fig.4-11)

i) The charger unit is located as shown in Fig.4-8.

ii) The charger unit consists of the case, corona wire and grid.

iii) The charger unit charges the OPC belt surface to the potential -V

corona charge.

iv) The charger unit has the grid controlled to the constant voltage ZD(V) for even

Process of Charging (Refer to Fig.4-12.)

i) The status of the OPC belt surface before charging is -CBV(V).

ii) The charger unit charges the OPC belt surface evenly to -V

negative charge.

(V) with the

(V) by generating a

Table of Contents