Code No.
17
MEDIA JAM
17 MEDIA JAM
18
CLOSE PANEL
17 CLOSE PANEL
19
SLEEP MODE
19 SLEEP MODE
20
SERVICE CALL
20 SERVICE CALL
LCD Message
[*7]
[*4]
[*8]
[*4]
[*4]
[*9]
V-17
Description of Message
x
The engine is standstill.
x
The Power LED is lit.
[*7]: The kind of jam (location of jam) is
indicated as follows;
FEED:
Paper Feeder
INNER:
Inside of Printer
OUTER:
Paper Exit
DRUM:
Transfer Drum
DPL:
Jam inside the duplex
unit.
x
This message can be cleared by
pressing the - button after open &
close operation of the front cover,
back cover and paper exit cover.
x
Engine halts as "CLOSE PANEL"
status.
x
The Power LED is lit.
[*8]: One of following message appears
to indicate the kind of cover being
open.
FRONT:
Front Cover
TOP:
Paper Exit Cover
REAR:
Rear Cover
DPL:
Rear Cover
x
Close the indicated cover, and then
above message is cleared.
x
The engine is idling.
x
The Power LED is lit.
x
This mode is cleared by sending a
WAKE-UP command (EC24) from the
LPC.
x
The printer is ready to print after the
warming-up process of the engine.
x
The engine is in standstill.
x
The Power LED is lit.
[*9]: Service Call error code is indicated
as follows;
For the details of error codes, refer
to Chapter VIII "Troubleshooting" in
this manual.