4.4
Paper Exit Unit
4.4.1
Paper Exit Unit Cover 2 / Paper Exit Front Cover 2
1) Open the paper exit unit cover 2.
2) Slide the four hooks to the direction of the arrow as shown in the figure below and
remove the (P. EX harness cover) from the printer.
3) Disconnect the cable harness.
4) Remove the support pin SP4X3 (2 pcs.) from both sides of the frame to remove the
paper exit unit from the frame.
(P. EX harness cover)
Paper exit unit cover 2
2
Hook
VII-49
4
1
3
Hook
Fig.7-68
Cable harness