Brother HL-2600CN Service Manual page 164

48 EACH IMAGE SET
This mode can reset the number of total pages of each color in the NVRAM whenever
NVRAM INITIAL is executed or the MCTL PWB 2 is replaced.
Description of Procedures
1) Press the Reprint button after selecting
"EACH IMAGE SET".
2) Select the desired color to reset in EACH
IMAGE SET.
3) Use the Back or Set button to select the
desired digit.
Use the Reprint button to input values to the
selected (blinking) digit.
Upon completing the input of the values, use
the Back or Set button to select SET on the
LCD and then press the Reprint button to
store the set value.
4) Press the - button to exit the EACH IMAGE
SET mode.
o
(a) (b)
o
(b) (c)
o
(c) (d)
o
(d) (e)
V-39
LCD Message
39 FACTORY MODE
a)
EACH IMAGE SET
48 IMAGE OF
b)
Y/M/C/K
48 IMAGE OF
c)
005432 P SET
48 IMAGE OF
d)
Y/M/C/K
39 FACTORY MODE
e)
DP CHECK
C