Brother HL-2600CN Service Manual page 362

6.4 Waste Toner Pack
1) Remove the waste toner pack from the
printer.
2) Clean toner around the pack and cover
the hole of the waste toner pack firmly
with gummed paper tape.
3) Put the waste toner pack into the
polyethylene bag and seal it firmly.
6.5 Cleaning
Clean the following areas with a vacuum
cleaner to remove toner.
1) Around the waste toner pack / Waste
toner feeder tube.
i) Vacuum toner from the exit of the
waste toner feeder tube and around
the waste toner pack holder.
ii) Cover the exit of the waste toner
feeder tube with vinyl wrap.
A-15
Waste toner pack
Ground
paper tape