Brother HL-2600CN Service Manual page 222

4.1.4 Side Cover (R) 2
1) Remove the set screw BT4X8 (1 pc.) of side cover (R) 2 at the rear of the printer.
Side Cover (R) 2
Fig.7-12
2) Slide the side cover (R) 2 in the direction of the arrows as shown in Fig.7-13.
3) Remove the side cover (R) 2 by releasing the two hooks.
Hook
2
1
Side Cover (R) 2
Front cover 2 Unit
Fig.7-13
VII-10