6.
RE-PACKING INSTRUCTIONS
When re-packing the printer before shipping, be sure to follow the steps and
cautions below. Failure to do so will cause toner or oil spill in the printer and
severe damage to the printer.
6.1
Toner Cartridge
1) Open the front cover 2 and remove
all the toner cartridges (K, Y, M, C)
from the printer.
2) Put the original protective cover
(orange) onto each cartridge and
put it into the polyethylene bag.
3) Put the toner cartridges into the
original starter kit packing.
x
If you do not have the original protective cover, cover each toner cartridge with bubble
sheet to protect the developer roller.
x
If you do not have the original starter kit packing, pack each toner cartridge firmly with
bubble sheet and put them into the outer carton.
PRECAUTION
Starter kit packing
A-12
Protective cover
Toner cartridge