Brother HL-2600CN Service Manual page 137

Code No.
00
00 READY
[*2
01
01 WAIT
[*2
02
02 PRINT [*5][*1]
[*2
LCD Message
[*1]
] [*4]
[*1]
] [*4]
] [*4]
V-12
Description of Message
x
The Power LED is lit.
x
The engine has completed the
warming-up process and is now ready
to print.
x
The engine is ready to receive
"PRREQ", signal from LPC.
[*1]: Applicable paper feeder is indicated
as follows;
/UPP: Upper Cassette
/LOW: Lower Cassette
[*2]: Size of the paper loaded on the
upper or lower cassette is indicated
as follows. Indication to be
displayed from the left in the order
of upper cassette, lower cassette.
LT: Letter size DL: Envelope
EX: Executive size CM: Envelope
PC: Post Card
LG: Legal size FR: Free size
A4: A4 size B5: B5 size
[*4]: The code numbers of consumables
or periodical replacement parts will
be indicated if they have reached
their life or should be replaced now.
If no periodical replacement is
required, there will be no indication
in the LCD.
For details of the periodical
replacement parts, see 36. CLEAR
CARE in the next section.
x
The Power LED is lit.
x
The engine is in the process of
warming-up.
x
For messages [*1], [*2] and [*4] that
appearing in the LCD, see the
description of code number 00 above.
x
The Power LED lit.
x
The engine is ready to print.
x
For messages [*1], [*2], [*3] and [*4]
that appearing in the LCD, see the
description of code number 00 above.
[*5]: Print color is indicated as follows;
Y: Yellow
M: Magenta
C: Cyan
K: Black
YM: Yellow & Magenta
YMCK Full Color
Commercial #10