Brother HL-2600CN Service Manual page 46

3) Pull and remove the tension release
pins on both sides (left & right) of the
OPC belt cartridge.
4) Remove the protective sheet from the
new OPC belt cartridge.
5) Install the new OPC belt cartridge into
the printer, along the guide of belt
cartridge lock lever provided at both
sides.
6) Set the belt cartridge lock lever at both
sides (left and right).
7) Close the paper exit unit cover 2.
Tension
release pin
OPC belt cartridge
OPC belt cartridge
Belt cartridge lock lever
III-7
Protective sheet
Tension
release pin
Fig.3-8
Fig.3-9
Fig.3-10