Brother HL-2600CN Service Manual page 152

40 DP CHECK
Each individual color Toner cartridge can be driven.
Procedure
Description of Procedures
1) Press the Reprint button after selecting "DP
CHECK".
2) Using the Back or Set button, select the
desired color and then press the Reprint
button. (Ex. yellow color)
3) The selected color toner cartridge starts to
drive. If no error occurs in driving, the
message "GOOD" is displayed in the LCD,
otherwise "FAIL".
Toner cartridge drive will automatically stop
after 60 seconds.
4) Press the - button to stop the DP CHECK
mode.
Press the - button one more time to return to
the status of screen (a).
o
(a) (b)
a)
b)
o
(b) (c)
c)
(c)
o
(c) (d)
d)
(d)
o
e)
(d) (e)
V-27
LCD Message
39 FACTORY MODE
DP CHECK
40 DP CHECK
Y/M/C/K
40 DP CHECK Y
GOOD
40 DP CHECK
Y/M/C/K
FACTORY MODE
DP CHECK