Brother HL-2600CN Service Manual page 197

N
When removing the fusing unit, take care to keep the unit level so that no oil leakage
or spillage occurs.
N
When shipping the printer, remove the oil bottle and the fuser cleaner from the fusing
unit. After removing the oil bottle, be sure to remove the oil remaining in the fusing unit
following the procedure below. Failure to do so will cause severe damage to the
printer.
i) Absorb the oil with the supplied syringe.
ii) After absorbing the oil, stuff the soft paper into the oil pan so that no oil leakage
occurs.
Sequence of Replacement
1) Prepare a new fusing unit before starting the replacement work.
2) Return the roller tension release levers at both sides to the direction of the
arrows.
3) Install the oil bottle and fuser cleaner onto the new fusing unit.
Oil bottle
Fig.6-20
Fig.6-21
VI-25
Fuser cleaner