4.3.11 FP Cassette Guide L/R
Note:
If the optional lower tray unit is fitted, remove the left hand screw of the front cross rail to
release the media cassette guide.
1) Close the front cover unit 2.
2) Remove the set screw ST3X8 (1 pc.) from the FP cassette guide L assembly.
3) Move the FP cassette guide L to the direction of the arrow as shown in the figure
below and release the plastic catches (4 pcs.). Disconnected the cable to remove
the FP cassette guide L from the frame.
4) Remove the set screw ST3X8 (1 pc.) from the FP cassette guide R assembly.
5) Move the FP cassette guide R to the direction of the arrow as shown in the figure
below and release the plastic catches (4 pcs.). Disconnected the cable to remove
the FP cassette guide R from the frame.
FP cassette guide L
Plastic catche
Note:
When assembling the FP cassette guide, be sure to correctly locate the 4 (four) catches.
Front cover
Plastic catche
FP cassette guide R
Fig.7-62
VII-45