AT&T MERLIN MAIL Implementation Manual page 53

Assigning AA Ports
to Night Service
Groups
Selecting Night
Service with
Time Set
4-12 Call Handling Methods
Follow this procedure to add the AA ports to all Night
Service Groups.
At the MERLIN II R3 System Display Console, enter
1
administration mode by sliding the T/P switch to P.
Press [
2
Conference
The Administration Menu appears.
From the Administration Menu, press [
3
From the Night Menu, press [
4
Dial the attendant's intercom number.
5
Press [ ].
6
Enter
Green lights flash at all attendant positions.
If there is more than one attendant, assign the
NOTE:
AA ports to all Night Service groups.
Press the Auto Intercom buttons for all the AA ports.
7
Green light on = port assigned to Night Service group
Green light off = port not assigned to Night Service group
To administer other groups, press [
8
steps 6 and 7.
9 Press [
Conference
administration mode by sliding the T/P switch to the
center position.
Follow the procedure below only if Night Service is
invoked by the MERLIN II R3 system through Night
Service with Time Set. Be sure the MERLIN II R3 system
clock is set for the current time and date.
Night Service can also be invoked manually by
NOTE:
pressing a Night Service button at an attendant
console.
] twice.
Group
] to continue administration or leave
], [ ].
More Night
].
] and repeat
Group