Setting Delayed Ring For Operator - AT&T MERLIN MAIL Implementation Manual

SETTING DELAYED
RING FOR
OPERATOR
4-2 Call Handling Methods
Press the line or line pool buttons associated with AA.
7
Green light on = line assigned to CDG
Green light off = line not assigned to CDG
Press [
8
Conference
leave administration mode slide the T/P switch to the
center position.
Use Centralized Programming to set the lines assigned to
the Automated Attendant Service for delayed ring at the
System Operator's position.
At the MERLIN II R3 System Display Console, enter
1
administration mode by sliding the T/P switch to P.
Press [
2
Conference
The Administration Menu appears.
From the Administration Menu, press [
3
[ ], [
More Cntr-Prg
Press the Auto Intercom button of the station to
4
be programmed.
Press [ ].
5
Enter
Press the line or line pool button.
6
Choose the appropriate option:
7
[ ] [ ] [
>
* 3
that is also assigned to the Automated Attendant
Service.
The red light next to the line button flashes.
[ ] [ ] [
>
* 3
the lines appearing on this station are also assigned
to the Automated Attendant Service.
The red lights next to all line buttons flash.
Press [
8
Conference
leave administration slide the T/P switch to the
center position.
] to continue administration or to
] twice.
].
] for delayed ring on the line or line pool
6
] [ ] for delayed ring on all lines if all
4 6
] to continue administration or to
],
More