Setting Immediate Answer - AT&T MERLIN MAIL Implementation Manual

SETTING IMMEDIATE
ANSWER
6-2 Providing Call Answer Service
NOTE:
Each CA port can cover up to six stations.
Press the button to confirm setting.
8
9
[ ] [ ] [ ] for delayed ring.
* 3 6
The red light next to the button flashes.
Follow the procedure only if you are changing
Call Answer Service from delayed answer to immediate
answer. If you are performing the initial installation, do
not use this procedure since immediate answer is the
factory setting.
NOTE: Since this selection sets all ports to immediate
answer, you must reset the Automated Attendant
ports if they should be set for delayed answer.
[ ] (the MERLIN MAIL system extension).
1
MERMAIL
The MERLIN MAIL system greeting plays.
2
[ ] [ ] to enter Voice Mail.
* 7
The Voice Mail greeting plays.
3
System Administrator's [
System Administrator's [
4
Your name plays, followed by the Voice Mail Activity Menu.
5 [ ] to administer the MERLIN MAIL system.
9
The System Administration Menu plays.
6 [ ] to administer System Parameters.
1
The System Parameter Menu plays.
7
[ ] for Immediate Answer.
3
[ ] for Immediate Answer for all ports.
8
4
NOTE: If the Automated Attendant Service is set for
delayed call handling, reset the AA ports for
delayed answer.
The Immediate Answer setting is confirmed.
] followed by [
Ext.
] followed by [
Password
].
#
].
#