Setting The Merlin Mail System Parameters; Labeling The Aa/Vms Ports - AT&T MERLIN MAIL Implementation Manual

LABELING THE
AA/VMS PORTS

Setting the MERLIN MAIL System Parameters

Follow the procedure below to label the MERLIN MAIL
system ports so that display phones can easily identify
calls from the MERLIN MAIL system.
At the MERLIN II R3 System Display Console, enter
1
administration mode by sliding the T/P switch to P.
Press [
2
Conference
The Administration Menu appears.
From the Administration Menu, press [
3
[ ], [ ].
More Label
From the Label Menu, press [
4
Press the Auto Intercom button for an AA/VMS port.
5
The green light goes on.
Press [ ].
6
Enter
Enter the label, "MERMAIL."
7
Press [ ] and repeat steps 5 and 7 until labels are
8
Next
entered for each port.
Press [ ].
9
Enter
Press [
10
Conference
administration mode by sliding the T/P switch to the
center position.
There are a few settings required for the MERLIN MAIL
system that are independent of the services being used.
The date and time needs to be set, Mailboxes assigned,
and services selected. These and other system parameters
are essential for proper operation.
] twice.
Stations
] to continue administration or leave
Required Settings
],
More
].
2-7