Setting No Ring For Other Stations - AT&T MERLIN MAIL Implementation Manual

SETTING NO
RING FOR
OTHER STATIONS
4-4 Call Handling Methods
If the lines covered by the Automated Attendant Service
appear at any other station, use Centralized Programming
to set them for no ring.
At the MERLIN II R3 System Display Console, enter
1
administration mode by sliding the T/P switch to P.
Press [
2
Conference
The Administration Menu appears.
From the Administration Menu, press [
3
[ ], [ ].
More Cntr-Prg
Press the Auto Intercom button of the station to
4
be programmed.
Press [ ].
5
Enter
Press the line or line pool button.
6
Choose the appropriate option:
7
[ ] [ ] [
>
* 3 5
answered by the Automated Attendant Service.
The red light next to the line button goes off.
[ ] [ ] [
>
* 3 4
that appear on this station are answered by the
Automated Attendant Service.
The red lights next to all line buttons go off.
Repeat this procedure for each station.
8
9 Press [
Conference
leave administration slide the T/P switch to the
center position.
] twice.
] for no ring on a line or line pool
] [ ] for no ring on all lines if all lines
5
] to continue administration or to
],
More