Assigning The System Operator Position - AT&T MERLIN MAIL Implementation Manual

ASSIGNING THE
SYSTEM OPERATOR
POSITION
2-14 Required Settings
Follow Form B: System Parameters to identify the
extension of the System Operator. Use the factory setting
760 unless it has been reassigned through flexible
numbering. If the dial plan already use 760, assign an
extension that is not in the dial plan so that calls
transferred from the MERLIN MAIL system appear on a
line button and not on the System Operator's intercom
button. Follow the procedure below to reassign the
System Operator position.
Extension 760 should not be assigned a Mailbox.
NOTE:
[ ] (the MERLIN MAIL system extension).
1
MERMAIL
The MERLIN MAIL system greeting plays.
[ ] [ ] to enter Voice Mail.
2
* 7
The Voice Mail greeting plays.
System Administrator's [
3
System Administrator's [
4
The Voice Mail Activity Menu plays.
[ ] to administer the MERLIN MAIL system.
5
9
The System Administration Menu plays.
[ ] to administer System Parameters.
6
1
The System Parameter Menu plays.
[ ] to administer the System Operator position.
7
5
The current extension plays.
System Operator's [
8
The new extension is confirmed.
] followed by [
Ext.
] followed by [
Password
] followed by [
Ext.
].
#
].
#
].
#