Setting Lines For No Ring - AT&T MERLIN MAIL Implementation Manual

SETTING LINES
FOR NO RING
5 Enter the CDG number, then press [
6 Choose the appropriate option:
Press the Auto Intercom button of the CA ports.
>
Green light on = port assigned to CDG
Green light off = port not assigned to CDG
Press line button of lines assigned to CA.
>
Green light on = line in CDG
Green light off = line not in CDG
Use Centralized Programming to set the lines assigned to
the CA ports for no ring.
At the MERLIN II R3 System Display Console, enter
1
administration mode by sliding the T/P switch to P.
Press [
2
Conference
The Administration Menu appears.
From the Administration Menu, press [
3
[ ], [
More Cntr-Prg
4
Press [ ].
Enter
Press the Auto Intercom buttom for a Call Answer port.
5
Press [ ].
6
Enter
Press the line button to be programmed.
7
8
[ ] [ ] [ ] [
* 3 4 5
The red light next to the line button is steady.
] twice.
].
] to set all lines to no ring.
Providing Call Answer Service
].
Enter
],
More
6-5