Creating Mailboxes - AT&T MERLIN MAIL Implementation Manual

CREATING
MAlLBOXES
2-8 Required Settings
Using single line sets to perform
CAUTION:
administration while on site may cause you to activate
or deactivate MERLIN II R3 system features
inadvertently. It is strongly recommended that only
ATL phones be used when administering the MERLIN
MAIL system locally. This is not a problem when
administering the MERLIN MAIL system remotely.
The factory setting for the System Administrator's
extension is 9997 and the password is 1234. To prevent
unauthorized administration of the MERLIN MAIL
system, these factory settings should be changed.
(See "Assigning the System Administrator Position.")
Follow Form A: Voice Mail Assignment to create up to
100 Mailboxes (due to traffic limitations a maximum of 40
Mailboxes is recommended). Follow the procedure below
to create Mailboxes for each subscriber.
[ ] (the MERLIN MAIL system extension).
1
MERMAIL
The MERLIN MAIL system greeting plays.
[ ] [ ] to enter Voice Mail.
2
* 7
The Voice Mail greeting plays.
System Administrator's [
3
System Administrator's [
4
The Voice Mail Activity Menu plays.
[ ] to administer the MERLIN MAIL system.
5
9
The System Administration Menu plays.
[ ] for Mailbox Administration.
6
4
The Mailbox Administration Menu plays.
[ ] to create a Mailbox.
7
4
Enter the [
8
Ext.
Mailbox, followed by [
The prompt will confirm if the Mailbox already exists.
] followed by [
Ext.
Password
] of the person being assigned the
].
#
].
#
] followed by [
#
].