Programming A Delete Message Button - AT&T MERLIN MAIL Implementation Manual

Programming a Delete Message Button

7-2 Programming Helpful Features
7
[ ] [ ] [ ] followed by the CDG number of either
* 9 1
the AA or CA ports.
If possible, use whichever MERLIN MAIL
NOTE:
system ports are not set for
delayed answer.
Press the button to confirm the setting.
8
Label the button "MERMAIL" on the phone.
9
Repeat steps 4 through 9 for each phone.
10
When a subscriber with a display phone receives a
message from the MERLIN MAIL system, the green
message waiting light goes on and the label, "MERMAIL,"
appears on the display when the subscriber presses his
or her Message button.
Use the procedure below to program a Delete Message
button on the phone so that the subscriber can delete the
"MERMAIL" display message.
At the subscriber's phone, slide the T/P switch to P.
1
Press an available programmable button.
2
3
Dial [ ] [ ] [
* 2
Press the button to confirm the setting.
4
].
6