Assigning Aa/Vms Ports To The Exclusion List; Selecting Co Dial Tone - AT&T MERLIN MAIL Implementation Manual

ASSIGNING AA/VMS
PORTS TO THE
EXCLUSION LIST
SELECTING CO
DIAL TONE
2-6 Required Settings
The AA/VMS ports must be assigned to the exclusion list
if the MERLIN II R3 system is set up for Night Service
with Outward Restriction. Follow the procedure below to
administer the AA/VMS ports to the exclusion list.
At the MERLIN II R3 System Display Console, enter
1
administration mode by sliding the T/P switch to P.
Press [
2
Conference
The Administration Menu appears.
From the Administration Menu, press [
3
From the Night Menu, press [
4
Press the Auto Intercom buttons of the
5
MERLIN MAIL system ports.
Green light on = outward restricted
Green light off = excluded from outward restriction
Press [
6
Conference
administration mode by sliding the T/P switch to the
center position.
Follow this procedure to change the MERLIN II R3
system from intercom to CO (Central Office) dial tone.
At the MERLIN II R3 System Display Console, enter
1
administration mode by sliding the T/P switch to P.
Press [
2
Conference
The Administration Menu appears.
From the Administration Menu, press [
3
From the Options Menu, press [
4
[ ], [
More ICMdial
Press [ ].
5
Externl
Press [
6
Conference
administration mode by sliding the T/P switch to the
center position.
] twice.
Exclude
] to continue administration or leave
] twice.
].
] to continue administration or leave
], [
More Night
].
], [
More Options
], [ ],
More More
].
].