Programming A Return Message Button - AT&T MERLIN MAIL Implementation Manual

Programming a Return Message Button

When a subscriber with a display phone receives a
message from the MERLIN MAIL system, the green
message waiting light goes on and the label,
"MERMAIL," appears on the display when the subscriber
presses his or her Message button.
If the subscriber has a Return Message button
programmed, he or she can retrieve the MERLIN MAIL
system messages by pressing the Return Message button
which automatically dials the Voice Mail Service
extension. Follow the procedure below to program a
Return Message button on a display phone.
At the subscriber's phone, slide the T/P switch to P.
1
Press an available programmable button.
2
3
Dial [ ] [ ] [
* 2 7
Press the button to confirm the setting.
4
].
Programming Helpful Features 7-3