Setting Modem For No Ring - AT&T MERLIN MAIL Implementation Manual

SETTING MODEM
FOR NO RING
2-4 Required Settings
Use Centralized Programming to set the lines assigned to
the modem port to no ring.
At the MERLIN II R3 System Display Console, enter
1
administration mode by sliding the T/P switch to P.
Press [
2
Conference
The Administration Menu appears.
From the Administration Menu, press [
3
[ ], [
More Cntr-Prg
Press [ ].
4
Enter
Press the Auto Intercom button for the modem port.
5
The green light goes on.
Press [ ].
6
Enter
Press the line button to be programmed.
7
[ ] [ ] [ ] [
8
* 3 4
The red lights next to all line buttons go off.
Press [
9
Conference
administration mode by sliding the T/P switch to the
center position.
] twice.
].
] for no ring on all lines.
5
] to continue administration or leave
],
More