Creating Or Modifying A Volume - Neoware e140 - Thin Client User Manual

Assigning Volumes to Clients

Creating or Modifying a Volume

70 Creating or Modifying a Volume
You can create a new volume by right-clicking in the Volume panel
Create Volume
and selecting
an existing volume by double-clicking on the Volume item in the
Volume panel, or by right-clicking on this item and selecting
erties
. A dialog consisting of several tabs is displayed.
General
The tab enables you to specify a name for the volume that
will be used to identify it in the Console.
Specify the name of the hard disk image file to use in the
...
box (click the button to browse for it). Note that the file paths are
relative to the location of the running nvdd server. This is particu-
larly important to remember when you modify the configuration of a
remote Image Manager server (then using the browse button is irrel-
evant).
Description
The box enables you to provide a brief description of the
volume which will be displayed on the client screen when it starts.
Physical Parameters
The
size of the volume and whether it is used as a boot drive or storage.
Heads
: 255 (usually)
Sectors
: 63 (usually)
in the pop-up menu. You can modify
options enable you to specify the actual
Prop-
File name