Neoware e140 - Thin Client User Manual page 69

OK
19
Click .
In order to restore the original configuration of your client OS,
Windows needs to be stopped. This is required in order to com-
pletely remove all the drivers installed previously.
Yes
20
Click to shutdown the client computer. If you click
Neoware Image Manager Client drivers will not be completely
removed from the local OS. They will be completely removed at
Windows shutdown.
21 On the Neoware Image Manager server, shut down the NVDD
server module:
Windows system: Press the keys Ctrl + C
Linux/FreeBSD system:
Either press the keys Ctrl + C, or send a
from another shell (for example, by using the
mand with the appropriate parameters).
Two files will have been created by Client Builder in the target
directory for the client hard disk image:
a file containing the actual image (e.g.
•
a configuration file (e.g.
•
You now need to configure the server in order for clients to be able
to access the image. This is described in the chapter: "Enabling Cli-
ents to Access Images" on page 59.
Creating a Client Image
SIGINT
disk0.vol
nvdd.disk0.vol.conf
Using Client Builder
No
,
signal to
nvdd
com-
killall
)
)
53