Volume Geometry; Volume Type - Neoware e140 - Thin Client User Manual

The NVDD Configuration File

Volume Geometry

Volume Type

226 Configuration File Settings
choose from (i.e. if several bootable volumes are available to this
client).
For example:
disk0.desc=Windows XP sp2 (Back Office)
The following parameters are created by Client Builder when it cre-
ates the image file and associated configuration file.
<volume_name>.cylinders
Specifies the number of cylinders for the virtual disk.
<volume_name>.heads
Specifies the number of heads for the virtual disk.
<volume_name>.sectors
Specifies the number of sectors for the virtual disk.
<volume_name>.floppy
(optional – default:
false
Specifies if this volume is a floppy image. Unit letters at DOS/BIOS
level depend on this. Value:
<volume_name>.boot_device
(optional – default:
false
Specifies if this volume is a boot device. Value:
Refer to the section "Enabling Client MultiBoot" on page 235 for
details on how to specify a choice of volumes for a client to boot
from.
<volume_name>.type
)
or .
true false
)
or .
true false