Neoware e140 - Thin Client User Manual page 280

The mPXELdr Configuration File
264 Keywords
Volume selection is achieved using the Up and Down arrow keys
then pressing the Enter key. Note that even if there is only one
volume available for selection, the user still has to press Enter to
continue. Once the user has selected and validated a volume,
mPXELdr will attempt to boot that volume.
You can return to the server selection screen by pressing the Escape
key.
Note: The
VolSelectionTO
chapter have NO EFFECT in interactive mode. This is by design.
Interactive mode is definitely interactive, and assumes human
interaction is required.
parameters described later in this