Allowed Clients; Group Definitions - Neoware e140 - Thin Client User Manual

Allowed Clients

Group Definitions

<volume_name>.users
Comma separated list of clients allowed to access this volume.
<volume_name>.admin_users
(optional)
Comma separated list of clients allowed to access this volume as
administrators. Note that only one administrator client is allowed at
the same time. When an administrator is accessing the disk, all other
clients are refused. An administrator client cannot access specified
volumes when some other (non-Admin) clients are still present.
<volume_name>.read_only_users
(optional)
Comma separated list of clients allowed to access this volume in
read only mode. See also
<volume_name>.unicast_users
Comma separated list of users allowed to access this volume in uni-
cast. See also
group.unicast
groups
This is a comma separated list of group definitions. A group is used
at initialization time to determine which clients can access the
shared drives. Depending on the client user name (see
will tell the client which volumes it should mount and assign spe-
cific modes. Please note that this information is only general, real
authentication is ruled at volume level.
<group_name>.vols
This is a comma separated list of volume names that stations belong-
ing to the group should access.
The NVDD Configuration File
.
group.read_only
.
Configuration File Settings
),
users nvdd
231