Neoware e140 - Thin Client User Manual page 268

The mPXELdr Configuration File
252 Introduction
3
ip1_ip2_ip3.ini
Search for an
.ini
.
ip1.ip2.ip3
4
ip1_ip2.ini
Search for an
.ini
.
ip1.ip2
5
ip1.ini
Search for an
.ini
.
ip1
6
m1_m2_m3.ini
Search for an
.ini
byte MAC address prefix, i.e. belonging to the same "Ethernet
MAC address block". A block always corresponds to a single
manufacturer, but a manufacturer might have one or several
blocks and models. In a number of cases, though, the MAC
address prefix may be used to identify machines with similar
LAN hardware configuration.
7
<mPXELdr boot file name with extension>.ini
Search for an
.ini
work Boot Program that was used to boot this station. For
instance, if mPXELdr was renamed to
was used to boot this station, the loader will
MyPXELdr.bin
search for
MyPXELdr.bin.ini
8
mPXELdr.ini
Search for this (hard coded) exact name, with this exact capitali-
zation.
If at this point, no
an error message and merely use its default options and the
server list provided in Option 132 of the DHCP (if any).
file common to all IP addresses starting with
file common to all IP addresses starting with
file common to all IP addresses starting with
file common to all the machines with this 3-
file with exactly the same name as the Net-
MyPXELdr.bin
.
file has been found, mPXELdr will give
.ini
, and