Installing Image Manager Components; System Requirements; Client Requirements - Neoware e140 - Thin Client User Manual

System Requirements

Client Requirements

Installing Image
CHAPTER 3
Manager Components
This chapter describes how to install Neoware Image Manager
components on the server and client computers.
PXE 2.x enabled.
•
Any CPU supported by the operating system to be downloaded
•
from the Neoware Image Manager server.
Main memory: 128 MB minimum, 256+ MB recommended.
•
Network card (100 Mb/s recommended).
•
In order to successfully install Neoware Image Manager, you will
need at least one client workstation with PXE 2.x capabilities that
will be used to create a hard disk or "flash disk" image. This client
station must have Windows XP, XPe or Windows 2000 properly
installed and configured on a regular hard disk drive, and all the
required software applications. It is recommended that the latest
service packs, patches, updates and hotfixes are applied to the oper-
ating system.
The system partition size (the partition where Windows OS is
installed) must be smaller than 2 terabytes. The system partition
will be used to build a hard disk image file that will be stored on
the Image Manager server. You must be sure that the file system
used on the server can handle files the same size as the partition.
For instance, if your hard disk image file is created on a FAT32
Neoware Image Manager User Manual
19