Nvdd Server Administration; Introduction - Neoware e140 - Thin Client User Manual

Introduction

NVDD Server
CHAPTER 18
Administration
This chapter describes the NVDDAdmin tool and NVDAdmin
protocol commands for administering a remote NVDD server.
The NVDAdmin protocol is used to communicate with a running
program. This protocol is used between a Neoware Image
nvdd
Manager console and a remote NVDD server in order to retrieve
the configuration file currently in use, to reload it after it has been
modified, and also to get information about the clients currently
attached to the server, etc. Client Builder can also use this protocol
when it creates the image of the original hard disk.
The NVDAdmin protocol uses TCP. The server listens on port
29035 by default, but this port can be changed in the server config-
uration.
NVDAdmin clients are:
Client Builder,
•
Image Manager Console,
•
NVDDAdmin tool, which is described in this chapter.
•
Neoware Image Manager User Manual
241