Installing Image Manager Components
34
Image Manager Server Configuration
This completes the Neoware Image Manager server initial configu-
ration. You can test that the NVDD server module is installed cor-
rectly by navigating to the directory containing NVDD then typing
one of the following at the command prompt to launch it:
Windows system:
Linux/FreeBSD system:
You should see various messages similar to that shown in the illus-
tration below.
To stop the NVDD server module, press the keys Ctrl + C.
nvdd -c nvdd.smalldisk.vol.conf
./
nvdd -c nvdd.smalldisk.vol.conf