Neoware e140 - Thin Client User Manual page 90

Assigning Volumes to Clients
74 Adding a Volume from Another Configuration File
Load volumes from file
defined in the configuration file.
Select the volume you want to copy to the current configuration file
Add
then click . The volume will appear in the Console Volumes list.
Repeat for each volume you want to add.
You must make sure that the properties of each copied volume
specify the location of the hard disk image file associated with the
configuration file currently being modified. To do this, double-click
on the name of the volume to display the
then change the path specified in
image file. Note that the file paths are relative to the location of the
running nvdd server. This is particularly important to remember
when you modify the configuration of a remote Image Manager
server (then using the browse button is irrelevant).
OK
Click to finish.
You may have to adjust the
Parameters
tab after you have added it.
button to list the names of the volumes
Volume Properties
File name
, or browse to find the
Volume ID
in the
dialog,
Volume Properties
,