Table of Contents
Advertisement
9
When the installation is complete, the Finish dialog box opens. Click Finish to complete the installation.
Figure 20
Installation complete
10 Proceed to one of the following sections:
•
2.4 Windows: Post-Installation Configuration and Verification on page 36.
•
2.5 Linux: Post-Installation Configuration and Verification on page 37.
•
2.6 Solaris Post-Installation Configuration and Verification on page 39.
2.4
Windows: Post-Installation Configuration and Verification
2.4.1
Server Component
Verify or perform the following on systems that have the server component of the Spheras Storage Director installed.
No additional configuration is required on systems that have the client component installed:
1
Edit the .\Program Files\Apache Group\Apache2\conf\httpd.conf file and ensure that the ServerName and any
aliases are correct. For more information, see A.1.1 Windows - Manually Configuring an Apache HTTP Web Server
on page 201.
2
Edit the .\WINNT\system32\drivers\etc\hosts file and ensure that it contains:
•
An entry for the server itself. The default setting is the loopback value of 127.0.0.1 for the name localhost.
•
The static IP address and name of the Spheras Storage Director Server. (This is necessary for Spheras Storage
Director Clients to communicate with the server.)
3
Verify your HTTP server installation by stopping and restarting your HTTP server:
Start-> Settings-> Control Panel-> Administrative Tools ->Services
36
Spheras Storage Director Installation and User Guide
Advertisement
Table of Contents
