Table of Contents
Advertisement
3
4
5
6
7
8
Table 2
RAID Controller Event Codes
132
Name
MLXEV_PHYSDEV_HARD_ERROR
Description Physical disk error found.
Cause
A bad sector was found on the physical disk.
Mechanical failure on the physical disk.
Host SCSI device detected illegal instruction.
Target device generated unknown phase sequence.
Action
If problem occurs frequently:
– Replace the physical disk.
– Contact your service representative.
Address
ctl: 0 chn: 13 tgt: 14
Severity
2 (Error)
Source
ExPro
Name
MLXEV_PHYSDEV_PFA
Description Physical disk PFA condition found.
This disk may fail soon.
Cause
Physical disk predicted some future failure.
External RAID logical device may have become critical.
Action
Refer to the enclosure manufacturer's service manual.
Address
ctl: 0 chn: 13 tgt: 14
Severity
2 (Error)
Source
ExPro
Name
MLXEV_PHYSDEV_AUTO_REBUILD_START
Description An automatic rebuild has started.
Cause
A physical disk failed and spare was available.
A physical disk failed and no spare was available.
A spare was added.
Action
None
Address
ctl: 0 chn: 13 tgt: 14
Severity
4 (Information)
Source
ExPro InPro
Name
MLXEV_PHYSDEV_MANUAL_REBUILD_START
Description A rebuild has started.
Cause
Client started the rebuild on user's request.
User replaced the failed device and 'raidbld' started the rebuild.
Action
None
Address
ctl: 0 chn: 13 tgt: 14
Severity
4 (Information)
Source
ExPro InPro
Name
MLXEV_PHYSDEV_REBUILD_DONE
Description Rebuild is over.
Cause
Rebuild completed successfully.
Action
None
Address
ctl: 0 chn: 13 tgt: 14
Severity
4 (Information)
Source
ExPro InPro
Name
MLXEV_PHYSDEV_REBUILD_CANCELED
Description Rebuild is cancelled.
Cause
User cancelled the rebuild.
Higher priority rebuild started.
Action
Restart the rebuild if required.
Address
ctl: 0 chn: 13 tgt: 14
Severity
4 (Information)
Source
ExPro InPro
Spheras Storage Director Installation and User Guide
Advertisement
Table of Contents
