Clearing The Event Log; Monitoring A Controller; Figure 81 Select Event Filter; Figure 82 Event Filter Dialog Box - Adaptec MAN-00005-UG Installation And User Manual

1 Click Event -> Event Filter from the menu bar.
Figure 81 Select Event Filter
The Event Filer dialog box opens (Figure 82 Event Filter Dialog Box on page 113).
Figure 82 Event Filter Dialog Box
2 Check or uncheck the event types to display and click OK.
The events displayed in the content area are refreshed. The Event Filter settings are only saved for the current
session. If you log out and log back onto the Client, your filter settings are lost.

Clearing the Event Log

6.2.3
To erase the entries in the event log, select Event -> Clear Log from the menu bar.
After you clear events for a particular server, you will not be able to retrieve them. If you have any doubt if will need the
event log at a future date, use the Print Log menu option to print the log.
It is recommended that you clear the event log:
•
When you have replaced a component of the Enclosure
•
When the event log becomes too large to manage.
6.3

Monitoring a Controller

To monitor activities on a controller, select a controller from the navigation area.
© 2003, Adaptec, Inc.
113