Table of Contents
Advertisement
Chapter 5
Configuration Activities
The following configuration activities are included in this section:
•
5.1 Setting Event Log Properties on page 67
•
5.3 Setting and Modifying Controller Properties on page 73
•
5.4 Creating Storage Configurations on page 86
•
5.5 Spanning in Spheras Storage Director on page 99
•
5.6 Expanding a Logical Drive on page 100
•
5.7 Deleting a Logical Drive on page 101
•
5.8 Expanding an Array on page 102
•
5.9 Deleting an Array on page 104
•
5.10 Restoring a Controller Configuration from a Previously Saved File on page 105
•
5.11 Backing Up a Controller Configuration on page 107
5.1
Setting Event Log Properties
The Event Log Properties dialog box provides you with options for setting desired event logging capabilities. This
includes setting application launching to notify you of events that need immediate attention. For example:
•
You may want to be notified immediately if a critical error occurs, so you would configure the system to launch an
application to page you.
•
If the log file is growing too quickly, you may want to remove all optimal events from it.
Note:
The Client must be running in order to receive alarms from notification applications.
Use the following steps to configure Event Settings:
© 2003, Adaptec, Inc.
© 2003, 2002 LSI-Logic Corporation
67
Advertisement
Table of Contents
