Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Adaptec 1684800 - EZ-SCSI Deluxe
Summary of Contents for Adaptec 1684800 - EZ-SCSI Deluxe
- Page 1 User’s Guide DELUXE EDITION...
- Page 2 Installing EZ-SCSI Deluxe in Windows 95 Installing Windows 95 Drivers You can install EZ-SCSI Deluxe in Windows 95 in several ways. Before proceeding to the instructions appropriate for your computer setup, please read the Pre-installation Tips. Pre-installation Tips Windows 95 must be installed before you install EZ-SCSI Deluxe. If you need to install Windows 95, but can’t access your CD-ROM drive, go to DOS Installer.
- Page 3 Windows 95 drivers is not necessary for most host adapters. However, if you have an older version of Windows 95, it may not recognize recently released Adaptec Plug-and Play host adapters. In this case, you may need to install Windows 95 drivers as described.
- Page 4 Installing EZ-SCSI Deluxe in Windows NT 4.0 You can install EZ-SCSI Deluxe in Windows NT 4.0 in several ways. Before proceeding to the instructions appropriate for your computer setup, please read the Pre-installation Tips. Pre-installation Tips Windows NT 4.0 must be installed before you install EZ-SCSI Deluxe. If you need to install Windows NT 4.0, but can’t access your CD-ROM drive, go to DOS Installer.
- Page 5 Installing EZ-SCSI Deluxe in Windows NT 3.51 You can install EZ-SCSI Deluxe in Windows NT 3.51 in several ways. Before proceeding to the instruction appropriate for your computer setup, please read the Pre- installation Tips. Pre-installation Tips Windows NT 3.51 must be installed before you install EZ-SCSI Deluxe. If you installed a new SCSI CD-ROM drive and want to use it for installing EZ- SCSI Deluxe, see Using a New SCSI CD-ROM Drive.
- Page 6 Note: If the CD-ROM drive is not listed, the host adapter driver may not be installed. Please see Installing Windows NT 3.51 Drivers . If you still cannot see the CD-ROM drive in File Manager, you may have a hardware problem. Check your cables or refer to your CD-ROM drive documentation.
- Page 7 Installing EZ-SCSI Deluxe in Windows 3.1x You can install EZ-SCSI Deluxe in Windows 3.1x in several ways. Before proceeding to the instructions appropriate for your computer setup, please read the Pre- installation Tips. Pre-installation Tips Windows 3.1x must be installed before you install EZ-SCSI Deluxe. If you installed a new host adapter or SCSI CD-ROM drive, go to DOS Installer.
- Page 8 12 In the next screen, enter the CD-ROM drive letter or accept the default letter. 13 Re-insert the Adaptec EZ-SCSI DOS drivers disk, and then press <Enter>. 14 The next screen displays entries to be copied to config.sys. Press <Enter> to make all modifications.
- Page 9 Adaptec EZ-SCSI Deluxe User’s Guide 15 The next screen displays the following message: EZ-SCSI HAS MADE THE APPROPRIATE CHANGES TO YOUR CONFIG.SYS FILE. Your original file has been saved as config.bak. Press <ESC>. 16 The next screen displays entries to be copied to autoexec.bat. Press <Enter> to make all modifications.
Need help?
Do you have a question about the 1684800 - EZ-SCSI Deluxe and is the answer not in the manual?
Questions and answers